Free online assessment

Assess your Inventor — advanced mechanical design skills for free

Independent knowledge assessment with a personalized learning plan; it may support preparation for further training or certification but is not an official exam.

This assessment measures knowledge and produces a practical diagnostic. Recommended modules are learning suggestions, not paid courses.

What is assessed

Questions about practical workplace skills

The assessment covers various knowledge topics with beginner, intermediate and advanced questions. Your score and topic breakdown highlight areas for review.

This is not a certification, qualification or official driver exam. For driving, always follow official provincial rules and requirements.

Who can use it

Employees, learners and skills managers

  • Employees and applicants.
  • HR professionals.
  • Employers, managers and team leads.
Assessment learning framework

Modules that may appear in your recommended plan

The topics below form the recommendation framework associated with this assessment. The system selects priorities using individual answers and proposes a plan to use independently with a provider of your choice. We do not deliver these courses through this website.

01
Topic M01

Projects, files and Inventor environment

3-hour workshop on IPT part file and model an individual part or component: guided practice, realistic scenarios and skills verification.

  • Identify the settings and tools required for IPT part file and model an individual part or component.
  • Apply “IPT part file” in a focused Projects, files and Inventor environment exercise.
  • Use “model an individual part or component” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to IPT part file and model an individual part or component.
  • Produce a quality-checked deliverable demonstrating IPT part file and model an individual part or component.
3 h
02
Topic M10

IAM assembly file and combine and constrain multiple components

3-hour workshop on IAM assembly file and combine and constrain multiple components: guided practice, realistic scenarios and skills verification.

  • Combine and constrain multiple components
  • Document parts and assemblies on 2D sheets
  • Use “combine and constrain multiple components” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to IAM assembly file and combine and constrain multiple components.
  • Produce a quality-checked deliverable demonstrating IAM assembly file and combine and constrain multiple components.
3 h
03
Topic M11

IDW/DWG drawing file and Inventor project

3-hour workshop on IDW/DWG drawing file and Inventor project: guided practice, realistic scenarios and skills verification.

  • Identify the settings and tools required for IDW/DWG drawing file and Inventor project.
  • Apply “IDW/DWG drawing file” in a focused Projects, files and Inventor environment exercise.
  • Use “Inventor project” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to IDW/DWG drawing file and Inventor project.
  • Produce a quality-checked deliverable demonstrating IDW/DWG drawing file and Inventor project.
3 h
04
Topic M02

Sketches and constraints

3-hour workshop on 2D sketch and Geometric constraint: guided practice, realistic scenarios and skills verification.

  • Define profiles and references that drive part features
  • Control relationships such as parallelism, perpendicularity, or concentricity
  • Use “Geometric constraint” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to 2D sketch and Geometric constraint.
  • Produce a quality-checked deliverable demonstrating 2D sketch and Geometric constraint.
3 h
05
Topic M12

Parametric dimension and Construction geometry

3-hour workshop on Parametric dimension and Construction geometry: guided practice, realistic scenarios and skills verification.

  • Numerically control sketch size and position
  • Create sketch references that do not directly form the consumed profile
  • Use “Construction geometry” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Parametric dimension and Construction geometry.
  • Produce a quality-checked deliverable demonstrating Parametric dimension and Construction geometry.
3 h
06
Topic M03

Part features

3-hour workshop on Extrusion and Revolve: guided practice, realistic scenarios and skills verification.

  • Add or remove material from a profile
  • Create a feature by rotating a profile around an axis
  • Use “Revolve” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Extrusion and Revolve.
  • Produce a quality-checked deliverable demonstrating Extrusion and Revolve.
3 h
07
Topic M13

Work feature and Fillet

3-hour workshop on Work feature and Fillet: guided practice, realistic scenarios and skills verification.

  • Create a reference plane, axis, or point for other features
  • Round edges according to a defined radius
  • Use “Fillet” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Work feature and Fillet.
  • Produce a quality-checked deliverable demonstrating Work feature and Fillet.
3 h
08
Topic M04

Parameters and design variants

3-hour workshop on Model parameter: guided practice, realistic scenarios and skills verification.

  • Identify the settings and tools required for Model parameter.
  • Apply “Model parameter” in a focused Parameters and design variants exercise.
  • Use “represent a dimension or value created by features and constraints” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Model parameter.
  • Produce a quality-checked deliverable demonstrating Model parameter.
3 h
09
Topic M14

User parameter

3-hour workshop on User parameter: guided practice, realistic scenarios and skills verification.

  • Create a named variable to drive multiple features
  • Link dimensions through functional relationships
  • Use “create a named variable to drive multiple features” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to User parameter.
  • Produce a quality-checked deliverable demonstrating User parameter.
3 h
10
Topic M15

Parameter equation and iPart

3-hour workshop on Parameter equation and iPart: guided practice, realistic scenarios and skills verification.

  • Identify the settings and tools required for Parameter equation and iPart.
  • Apply “Parameter equation” in a focused Parameters and design variants exercise.
  • Use “iPart” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Parameter equation and iPart.
  • Produce a quality-checked deliverable demonstrating Parameter equation and iPart.
3 h
11
Topic M05

Assemblies, constraints and joints

3-hour workshop on Assembly constraint and Joint: guided practice, realistic scenarios and skills verification.

  • Position components by removing selected degrees of freedom
  • Explicitly define position and degrees of freedom between components
  • Use “Joint” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Assembly constraint and Joint.
  • Produce a quality-checked deliverable demonstrating Assembly constraint and Joint.
3 h
12
Topic M16

Degrees of freedom and Grounded component

3-hour workshop on Degrees of freedom and Grounded component: guided practice, realistic scenarios and skills verification.

  • Describe remaining component translations and rotations
  • Lock a component as a stable assembly reference
  • Use “Grounded component” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Degrees of freedom and Grounded component.
  • Produce a quality-checked deliverable demonstrating Degrees of freedom and Grounded component.
3 h
13
Topic M06

Sheet metal, frames and standard components

3-hour workshop on Sheet metal rule and Flat pattern: guided practice, realistic scenarios and skills verification.

  • Standardize thickness, bends, and other sheet metal settings
  • Generate manufacturing geometry for the unfolded sheet metal part
  • Use “Flat pattern” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Sheet metal rule and Flat pattern.
  • Produce a quality-checked deliverable demonstrating Sheet metal rule and Flat pattern.
3 h
14
Topic M17

Frame Generator and Content Center

3-hour workshop on Frame Generator and Content Center: guided practice, realistic scenarios and skills verification.

  • Create a structure from standard profiles along a skeleton
  • Insert standard components from libraries
  • Use “Content Center” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Frame Generator and Content Center.
  • Produce a quality-checked deliverable demonstrating Frame Generator and Content Center.
3 h
15
Topic M07

Drawings, BOMs and documentation

3-hour workshop on Drawing view and Bill of Materials: guided practice, realistic scenarios and skills verification.

  • Place an associative representation of a part or assembly
  • Manage assembly component structure and properties
  • Use “Bill of Materials” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Drawing view and Bill of Materials.
  • Produce a quality-checked deliverable demonstrating Drawing view and Bill of Materials.
3 h
16
Topic M18

Parts list and Drawing annotation

3-hour workshop on Parts list and Drawing annotation: guided practice, realistic scenarios and skills verification.

  • Present the bill of materials on a drawing
  • Add dimensions, balloons, and notes to the deliverable
  • Use “Drawing annotation” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Parts list and Drawing annotation.
  • Produce a quality-checked deliverable demonstrating Parts list and Drawing annotation.
3 h
17
Topic M08

iLogic and automation

3-hour workshop on iLogic rule and iLogic form: guided practice, realistic scenarios and skills verification.

  • Automate configuration logic and actions in models
  • Provide a simple interface for changing controlled parameters
  • Use “iLogic form” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to iLogic rule and iLogic form.
  • Produce a quality-checked deliverable demonstrating iLogic rule and iLogic form.
3 h
18
Topic M19

Exported parameter and Event trigger

3-hour workshop on Exported parameter and Event trigger: guided practice, realistic scenarios and skills verification.

  • Make a value available for other uses such as BOM or automation
  • Automatically run a rule on a defined event
  • Use “Event trigger” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Exported parameter and Event trigger.
  • Produce a quality-checked deliverable demonstrating Exported parameter and Event trigger.
3 h
19
Topic M09

Performance, analysis and mechanical quality

3-hour workshop on Interference and Stress analysis: guided practice, realistic scenarios and skills verification.

  • Detect component volumes that overlap in an assembly
  • Evaluate structural response of a part or assembly using available tools
  • Use “Stress analysis” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Interference and Stress analysis.
  • Produce a quality-checked deliverable demonstrating Interference and Stress analysis.
3 h
20
Topic M20

Level of Detail representation and Design Doctor

3-hour workshop on Level of Detail representation and Design Doctor: guided practice, realistic scenarios and skills verification.

  • Reduce loaded assembly complexity for selected uses
  • Diagnose selected failed features or references
  • Use “Design Doctor” in a workplace task and explain the approach.
  • Diagnose and correct a workflow error relating to Level of Detail representation and Design Doctor.
  • Produce a quality-checked deliverable demonstrating Level of Detail representation and Design Doctor.
3 h
Assessment output

Actionable insight, not a sales pitch

The report provides an overall score, category breakdown and recommended modules. Use it to inform development discussions, document progress or complement candidate assessment.

View business use cases →

Privacy and recipients

The participant provides their email and that of the manager or authorized report recipient. The tool emails the report to those recipients according to its current process. Do not enter a third party without permission.

Review privacy information
Free assessment

Ready to assess your Inventor — advanced mechanical design skills?

45 questions and a suggested development plan. No course enrollment.

Take the free test